RBC grupo offers a resin-rich insulation system for the stator windings of rotating machines operating in thermal class F, H, C. These tapes and foils are unique and effective, possess outstanding quality and comply with the relevant standards. Important manufacturers of electrical rotating machines use these tapes and foils throughout the world. Resin-rich tapes and foils based on calcined or un-calcined muscovite mica paper and resin with glass-fabric or polyester-film backings. These products enable customers to construct the slot-section and overhang insulation of high-voltage windings that exceed all present standards and requirements.
RESIN RICH MICA TAPES
THERMAL CLASS F
Mica tape is made of calcined mica paper, PET film and glass cloth, bonded together with modified epoxy resin
Resin Rich insulating systems for the insulation of coils and bars of the electric machines, working under the conditions of the thermal insulation class F (155 °C)
Core ID 36 and 55 mm Width 15, 20, 25, 30, 35 mm Outside diameter (100 ± 10) mm Other dimensions are available on request.
6 months at temperature 25 °C 12 months at temperature 5 °C Maximum storage and transportation temperature 35 °C
The tape is a composition of mica paper, electrical insulation fabric made of glass filament yarns (hereinafter referred to as "electrical insulation fabric") and polyimide film bonded together and impregnated with an electrical insulating compound.
The warranty shelf life is as follows:
six months from the date of manufacture, if the tape is stored at a temperature of 15 - 35 °C and at a relative humidity of 45 - 75 %;
twelve months from the date of manufacture, if the tape is stored at a temperature of (5 ± 3) °C.
Name of indicator; Mica tape
Nominal thickness, mm;0.08;0.10;0.13
Maximum deviations from the nominal thickness, mm - average; ±0.1; ±0.1; ±0.02
Maximum deviations from the nominal thickness, mm - at individual points; ±0.02;±0.02;±0.03
Mass fraction of components, % - mica, no less;25;25;25
Mass fraction of components, % - binder;25 ±5; 25 ±5; 25 ±5
Mass fraction of components, % - volatile substances, no more; 1.5; 1.5; 1.5
Specific maximum tensile load, N/cm, not less; 60; 80; 120
Dielectric strength, kV/mm, no less; 50; 70; 55
RESIN RICH MICA TAPES
THERMAL CLASS C
Tape is a composition of mica paper, dielectric fabric made of glass filament yarns and polyimide film bonded together and impregnated with an organosilicon binder. Tapes designed for insulation of electrical machines and plants with insulation systems of heat resistance class 220.
The warranty shelf life is as follows:
at a temperature of 15 – 35 °C and a relative humidity of 45 - 75 % - four months from the date of manufacture;
at a temperature of (5 ± 3) °C - eight months from the date of manufacture.
Name of indicator; Mica tape
Nominal thickness, mm;0.08;0.10;0.11;0.13
Deviations from the nominal thickness, mm - average; ±0.1; ±0.1; ±0.1;±0.02
Deviations from the nominal thickness, mm - at individual points; ±0.02;±0.02;±0.02;±0.03
Surface density, g/m2;131±20; 150±26; 158±26; 205±30
Mass fraction of components, % - mica, no less;25;25;25;25
Mass fraction of components, % - binder;25-30; 25-30; 25-30;25-30;
Mass fraction of components, % - volatile substances, no more; 1.5; 1.5; 1.5;1.5
Specific maximum tensile load, N/cm, not less; 60; 80; 80;120
Dielectric strength, kV/mm, no less; 50; 65; 60;55